E-Mail: minibus_info@kingstar.com.cn    Tel: +86-759-2678262
Search

NewsShow Cases

Most Safety And Practical School Bus Manufacturer OF KINGSTAR

What does a professional automobile exporter do?

As an automobile manufacturer, we have a lot of product lines. Such as minibusses, minivan, cargo vans, trucks, SUVs, MPV, school buses, ambulances, police cars, electric cars and etc. We are not only a school bus manufacturer but also a minibus manufacturer.

bus to school

The term “school bus” refers to a passenger vehicle with more than seven seats, which is licensed in accordance with the “Regulations on the Administration of School Bus Safety” and is used to pick up and send students receiving compulsory education to and from school. While, the term “bus to school” refers to a passenger vehicle with more than seven seats. It is licensed in accordance with the “Regulations on the Administration of the bus to school Safety”. And it is used to pick up and send students receiving compulsory education to and from school. The school bus for primary school students should be designed and manufactured in accordance with the national standards for primary school students.

As a school bus manufacturer, we are going to show you one of our most popular school buses with you.

bus to school
School Bus Manufacturer

The brief introduction of the school bus

This school bus we called BG3 is a multiple body style structure minibus. It can be left-hand driving and also right-hand driving. The school bus has a high roof version and a semi-high roof version. The dimension of the school bus is 5,053 * 1,700 * 2,240mm, the wheelbase of the school bus is 2,890mm. The max speed of the school bus is ≥115km per hour. The fuel tank capacity is 70L, the seating capacity could be 16seats.

History of the bus to school:

Long before cars appear, there were horse-drawn school buses in the United States. The first company to produce school buses, called Wayne Works, has been producing wagons for 25 children since at least 1837. It is especially for transporting students.

After the invention of the automobile, Wayne Works installed the carriage on the chassis of the automobile in 1914. Therefore, it inventing the school minibus powered by power. Around 1927, Wayne Works and another school minibus manufacturer, the Blue Bird Body Company, began producing all-metal school buses.

 Requirements

The Ministry of Education asked all pilot areas to take measures in line with local conditions. And to take into account local economic and social development and the basis of mini bus work. Moreover, to put forward a feasible overall plan and specific implementation plan for the pilot work.

To strengthen organizational leadership, into the agenda of the government important will pilot work. It establishes and improves the leadership mechanism, perfects the government leading, public security, transportation, education, workplace safety, finance, and other departments on the working mechanism of close cooperation. And should further clarify the bus purchase, safety supervision, operation management, students’ education, and so on.

Including each link of the division of duties. To implement the pilot funds, increase the financial funds for the pilot work, the purchase of school buses, operation and maintenance, and other costs included in the local fiscal budget. This is to ensure that the funds in time and in full. And also is to ensure the smooth progress of the pilot work. It is necessary to increase publicity efforts, carry out various forms, solid and effective publicity activities. Moreover to increase a good public opinion environment for the smooth development of the pilot work.

The interior of the school bus

Our new type dashboard is mainly gray color looks quite simple and clear. We also have a wood-grain dashboard as an optional choice for you.

bus to school
School Bus Manufacturer

The bus to school sign

The traffic control department will also tighten the school bus driver qualification permit and management system. Moreover, it establishes the school bus driver annual examination, joint supervision, and withdrawal mechanism. In addition, in the future, where the minibus to scrap the standard, large buses and so on should be in the supervision of the vehicle administration of all over the disintegration. And put an end to scrap vehicles back to society, causing traffic safety risks.

The expiry date of the school minibus sign is no more than six months. If there is any change in the route, time, stop or vehicle, owner or driver of the school bus, the school or the school bus service provider shall get the school bus badge again in accordance with the regulations on the issuance of bus tags after the approval of the people’s government at the county level or the city divided into districts where it is located.

The bus shall carry out a safety technical inspection every six months after obtaining the minibus badge. The first half month of each semester is the minibus safety technical inspection time. The minibus owner should first go to the motor vehicle safety technical inspection institution for motor vehicle inspection. And with the motor vehicle safety technical inspection report to the key vehicle management agency for the bus use permit application.

This image has an empty alt attribute; its file name is 3-4-1024x691.jpg

The school bus operation

Introduction to the School minibus operation demonstration area is the Ministry of Education on August 26, 2011. The first to carry out the school bus operation management pilot work in six areas. It is including Zhejiang Province, Huzhou City Deqing County, Shandong Province Weihai, and Binzhou City Wudi County, Liaoning Province, Benxi City Huanren County, Heilongjiang Province Jixi City, and Shaanxi Province Xi ‘a Yanliang District.

The engine of the school bus

This is a diesel engine school bus; the engine model of the school bus is BJ493Q with a 4JB1 steel seal on the motor. The engine type of the school bus is 4 cylinders in line, turbocharger. The displacement of the school bus is 2,771L, the emission is Euro III. The rated power of the school bus is 70/3600kw/rpm, the max torque of the school bus is 225/2300 N.m/rpm.

The chassis of the school bus

The clutch of the school bus is a single disk, hydraulic operation. The transmission of the school bus is a manual transmission with 5 speeds ahead and 1-speed reverse. The rear axle is 4.1. The front suspension of the school bus is independent suspension; the rear is leaf spring suspension. The braking system of the school bus is vacuum servo, hydraulic brake; front disc and rear drum, hand brake also equipped. The tires equipped on the school bus are 195/70R15C tubeless. With an aluminum alloy ring. For the passenger seats, driver and co-driver seat with 3-point seatbelt, the other passenger seats are equipped with a 2-point seat belt.

China State Council Office of Work Safety Commission in the “Twelfth Five-Year Plan for Road Traffic Safety” emphasized as below. To establish and improve the bus safety management laws and regulations and safety management system. And to clear the right of way for school buses, strengthen bus supervision, to ensure bus safety. It also stipulates that school buses must be with satellite positioning and speed limits. In March 2012, the Chinese school bus new national standard implementation, on and off the car swipe card, parents can receive text messages.

On December 1, 2017, the “Code for English Translation and Writing of Public Service Fields” was officially implemented. It is stipulating that the place of origin should have a new name Bus or Shuttle Bus in English.

As a professional school bus manufacturer, we also accept OEM service. If you need school bus customization, please feel free to contact us.  

Prev:

Next:

Leave a Reply